dimensional drawing of RS718


The key switch RS718 is a small DP switch. The switching sequence on turning the key is very flexible. It is available with Master key and limited keys that cannot switch to all positions available for the master key. Its fixing provision is designed for housing and front panel.

The illustration on the right shows the side view of the key switch. Please click on this illustration to obtain a complete dimensional drawing of the key switch and of the mounting hole, or download the dimensional drawing as pdf: rs718_en.pdf

picture: small key switch RS718 for front panel mounting

technical data of RS718
contact travel between two position: 45°
number of positions: up to 3
key removable in positions: 1,2,3
number of tremblers: 3
max. keying provisions: 124
lock body and both keys are provided with identical numbers
colour: black
material of lock cylinder and housing: plastic
material of tremblers: Brass (CuZn39Pb2)
insertion and removal force: ≤ 4,5 N
retention torque: 2,5 Ncm ±25%
dimensions: see drawing rs-718-14_en.pdf
installation: front panel
pins (outside from below) 4
number of contacts: 2
contact material: AuAgNi 71/26/3
contact force: ≥ 0,2 N
contact resistance: ≤ 80 Ω
rated contact load at 24 V ≤ 300 mA
rated contact load at 60 V ≤ 100 mA
max. switched energy 0,1 mWs
material on which contacts are mounted CuNi18Zn20
max. rated voltage: 60 V
slankover voltage (lock cylinder - contacts): ≥ 10 kV